EVERFLEX WEATHER MATE SEALANT is a multi-use sealant that can be applied in wet weather
and to wet surfaces, remaining permanently flexible. Intended for external use only it can be
overpainted with most paints and woodstains when cured. Adheres to most common surfaces.
Can be applied in all weathers -.
Sticks to wet surfaces.
Resists all weather conditions.
Permanently flexible.
Overpaintable.
Can be used in conjunction with Bitumen and asphalt.
For all roofline applications. Ideal for use with lead, bitumen and galvanised steel, and for sealing around flashing, gutters, downpipes and corrugated roofing.
Ideal for perimeter pointing to all window and door frames, and all external weathersealing
applications.
For sealing between metal and composite roof and wall panels.
For remedial sealing over all other sealant, old putties, mastics and industrial metal panel sealing.
Not for use in aquarium manufacture.
Not for internal use
Not for use in food preparation areas
Not for use on joints likely to exceed 25% movement.
Paintable only when cured.

All surfaces must be clean and dust free. All loose or flaking surface coatings should be removed before application. Glass, metal and aluminium should be cleaned with a proprietary solvent cleaner prior to application for optimum adhesion.
Cut the tip of the cartridge taking care not to damage the thread. Apply nozzle and cut cleanly at an
angle of 45* with an opening slightly larger than the gap to be sealed. Apply using a standard sealant
gun. Best results will be obtained by keeping an even pressure on the gun trigger and keeping the gun
at a constant angle to the surface being sealed. Always tool down immediately following application
using a spatula or piece of wood wetted with a soap and water solution. When applied to wet surfaces
tooling down is essential to ensure a proper bond with the surface is formed. The product is tack free
after 10-15 minutes, and should be allowed to cure for 24 hours before painting. Clean tools with white
spirits.
Movement accommodation: + or -25%
Skinning time: 15 mins @ 20C
Cure time: 2mm per 24 hours
Hardness Shore A: 22
Shrinkage: @ 10%
Service temperature resistance: -25C to + 95C
Application temperature resistance: +5C to + 50C
Specific gravity: 1.69
Cleaning: Uncured sealant white spirit
Minimum joint width: 5mm
Maximum joint width: 35mm
Joint ratio: Maximum depth 50% of joint width
Elongation at break: 350%

Flammable. Keep away from sources of ignition. No smoking
during use.
Use only in well ventilated areas.
Always wear gloves.
Do not ingest.
Keep out of reach of children.
Store in cool dry conditions with good ventilation and away from sources of ignition.
Use within two years.



Everbuild Everflex Weathermate Sealant